(803)-900-0500
South Carolina
803-900-0500
Wisconsin
715-525-2669
CSX9000
Standard Equipment
-
Shelby High-strength hand laid fiberglass composite.
-
Aesthetically and dimensionally correct body painted with two stage show quality paint finish.
-
Original style indicator lenses and head lights
-
Original style Bumperettes with Hoops
-
Original style hand crafted windshield frame chrome over brass & windshield wipers.
-
Original style 15" Wire Wheel rims with spinners.
-
Original style pedals, catches & fittings.
-
Original Style Stewart Warner (SW) gauges.
-
Moto- Lita wood steering wheel original design.
-
Adjustable Driver's seat.
-
Carpeted interior and trunk.
-
Original style latch and lock seat belts.
-
Original frame configuration with round tube main rails.
-
120 wall thickness - 90" wheelbase.
-
Original four wheel independent suspension with Transverse Leaf Springs.
-
Rack and Pinion Steering.
-
Willwood vented disc brakes with Shelby Calipers: Front-4-pot & Rear-Single-pot.
-
Billstein custom crafted shocks.
-
Aluminum, single core hi-performance radiator, shroud, dual fans and braided lines.
-
Aluminum finished firewall which dissipates engine heat.
-
Monza style filler with Locking gas cap.
-
Pressure tested stainless steel fuel tank.
-
Licensing/Registry/Owners Clubs:
-
Exclusive Shelby CSX8000 sequence number.
Options
-
Special Interior (Leather Seats, Dash, & Map Pockets)
-
Heater\Defroster
-
Fresh Air Ventilation Box
-
Detachable Steering Wheel: Detachable
-
Glove Box
-
Door Map Pockets
-
Grab Handle
-
Cobra Mats
-
Seat Belt: Upgraded to a 6 Point Harness
-
Oil Cooler
-
Coolant Tank, FIA Style
-
Oil Vapor Separator Tank
-
Differential Oil Cooler System
-
Non-Standard Differential
-
Complete Exhaust System
-
Tonneau Cover
-
Custom Car Cover
DIMENSIONS
BODY
The Superformance MKII roadster bodywork replicates the later of the 289`s which incorporated modifications to fender flares that will accommodate the slightly wider tires fitted onto chrome wire wheels. One of the improvements made by Hi tech was that the footwells were tweaked so that the taller North Americans can now sit comfortably.
SUSPENSION
To compliment an original chassis you need to follow the same rules when it comes to the suspension. It had to be period correct, or as close as possible. The original slab side had a transverse leaf spring style suspension which requires different length springs to change camber settings we decided to use heim joints which were used on some of the original competition cars.
Another change with regards to safety was to add an additional pick-up point to the chassis to increase the shear strength of the bolt passing through the lower control arm rose joint or poly-bushed rod end. The original springs were made of thinner steel than that available today. In an effort to keep compression rate the same, this car comes with one blade less and “free camber” was changed to keep the ride heights equal from front to rear. This insistence on authenticity means that owners of a Superformance MKII Roadster will have virtually the same driving experience as the original.
CLUBS
Only Cobra Reproduction licensed through Carroll Shelby Licensing Inc.
Superformance forum (SCOF) & Superformance registry where sales are recorded to preserve value of car.
EXTERIOR
Hand laminated fiberglass body with reinforcing inserts, Aesthetically and dimensionally correct body painted with two stage show quality paint finish
Original style indicator lenses and headlights
Original style Bumperettes with Hoops
Original style hand crafted windshield frame chrome over brass & windshield wipers
Original style 15” Wire Wheel rims with spinners
Specifications
The Chassis is the original John Tojero designed 3” tubular rail ladder with cross-member. This chassis is reproduced using drawings obtained from AC cars and also implements the necessary changes to utilize rack and pinion steering . The 3” tubes are tig and mig welded to guarantee a safer and stronger chassis. This is much stronger than the arc and gas welded originals. Pain staking efforts were made to reproduce the chassis as close to an original as possible while incorporating a few modern improvements, like inserting a 3" square tube through the main rails to prevent flexing. Building the cars with a meticulous eye on authenticity took time, but this resulted in a superior driving experience.
ENGINE AND TRANSMISSION
An Original would have probably been a 289 with a B.W T10. Today, the recommendation would be a 289/302 based engine with a more modern Tremec TKO or similar transmission.
FINISHES
Aluminum finished firewall which dissipates engine heat
Monza style filler with Locking gas cap
14 gallon pressure tested stainless steel fuel tank
Headers for a Ford based 302 Windsor V8 engine
Aluminum, single core hi-performance radiator, shroud, dual fans, oil cooler and braided lines
INTERIOR
Moto- Lita wood steering wheel original design.
Adjustable Driver’s seat
Carpeted interior and trunk
Classic Stewart Warner gauges
Original style pedals, catches, fittings, shifter and hand brake lever
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors
Heater/defogger
Original style latch and lock seat belts
First Name
Stock Number
This is your Testimonial quote. Give your customers the stage to tell the world how great you are!
Harry Williams
Client Review
This is your Testimonial quote. Give your customers the stage to tell the world how great you are!
Robert Harris
Client Review
This is your Testimonial quote. Give your customers the stage to tell the world how great you are!
Bob Spencer
It is very rare that I would take the time to write a review, but in this case I am compelled overwhelmingly to share my experience of purchasing my Superformance FIA Cobra.
After decades of contemplating building a replica Cobra, I decided to instead purchase a Superformance Cobra. The main reason is, I felt that to obtain the high quality fit and finish of the Superformance, I would be spending very close to the same dollars to get the same quality and I would have to do the work of assembling the car, wiring, sourcing parts and building the engine.
As luck would have it, there were several NEW Superformance FIA Cobras on the market in the fall of 2020. After contacting several dealers, I booked a trip to South Carolina with my 12 year old son to visit Downforce Motorsports. Probably the main reason, I decided on Downforce was because the Owner, Dan Long, had questioned me on the purpose for the car. Ie was it going to a street car or what? My answer to Dan was the car will be MOSTLY track and some street. Dan then reviewed with me the options he felt were appropriate for a track car vs a street car AND WHY. The knowledge Dan communicated to me on the differences between a street car vs track car made my decision to work the Dan easy. He gets it. He understands, there are big differences.
While meeting with Dan and his wife Anna in South Carolina, it was clear my son and I were dealing with truly wonderful, knowledgeable people. During that meeting in Dec 2020 we bought the car, and that was just the start of the continued customer service. Dan had arranged for me to meet with Prestige Motors for the engine build and Olthoff Racing for engine install and suspension set up. By April of 2021, I was testing the car at Virginia International Raceway with my son cheering me on. After spending a few months getting used to the power/weight ratio, we changed the alignment for aggressive track use. I have competed in 3 events that included autocross and roadcoarses in 2022 and have won my class at each event. Dan Long has kept in touch during my Cobra adventures and is always helpful when I need advice or resources.
If anyone is interested in purchasing a Cobra, Daytona Coupe, or GT40, I would highly recommend contacting Downforce Motorsports about Superformance.
CUSTOMER TESTIMONIALS
Vinny Giglio
I've been dealing with Dan for the past 2+ years. I immediately fell in love with his passion for Superformance cars and cars in general, and his ability to think outside of the box with his builds. I've purchased 6 cars from Dan to date, both used and new and have 3 more cars on order. I love having a conversation with Dan and the excitement about the future build and I can always rely on him to have great input on color combos, what engine to use, etc. He actually listens to what I'm trying to accomplish with a build, somehow completely understands and feels that vision alongside me, and then makes suggestions that I would have never thought of that end up making the car something I could have only dreamed of. Its the small details that matter, and the ownership experience of the Superformance brand is nothing short of amazing, and Dan truly helps bring the experience to the next level! I currently own a Grigio Silverstone GT40 Mki and a 1st gen Daytona Coupe in Guardsman Blue and White, and also have a Cobra MkiiiR, a GT40 mkii and Daytona Coupe on order. I'm very thankful for Dan and his knowledge and have enjoyed becoming friends over the years as well!